Mounting

When installing the device, be aware that any obstacles in the signal transmission path may reduce the radio signal strength.

Possible ways of fixing:

Mounting location	Recommendation
DIN rail mounting	Hanging vertically on the DIN rail place, pull the latch back slightly downwards and press the housing until the lock catches
Mounting to a tube or antenna mast	Remove the DIN rail latch, insert the clips 3.6–5mm through the holes in the housing, tighten the clips
Wall mounting with screws	Mount with the wide or narrow edge of the housing, fit the screws M2-M2.5 into the holes in the case